- Home
- >
- News
- >
- Technical Article
- >
- What equipment is required for the production line of aluminum alloy doors and Windows?
What equipment is required for the production line of aluminum alloy doors and Windows?
What equipment is required for the production line of aluminum alloy doors and Windows?
Many friends who have just entered the door and window profession want to know the equipment, and today Xiaobian will introduce these door and window equipment to us.
Qualified doors and Windows from the selection of materials to processing and even equipment and other links are linked, the carelessness should not be, the neglect of any link may affect the final quality of doors and Windows. As a broken bridge aluminum door and window equipment manufacturers because they understand this, so has been the quality of equipment as the top priority of the enterprise, will provide high-precision, high-quality doors and Windows processing equipment for doors and Windows processing enterprises as our best direction.
Today, give us an introduction to the broken bridge aluminum doors and Windows equipment ---- double-head cutting saw, during which the aluminum doors and Windows digital display double-head fine cutting bed because of its digital display of cutting scale and processing accuracy of high-grade characteristics by many doors and Windows processing enterprises love.
1, broken bridge aluminum alloy profile cutting saw.
It is used to cut the aluminum alloy profile of the broken bridge, and the commonly used cutting viewpoint is 45° and 90°. The cutting machine used in the large aluminum alloy door and window production line is a large fine cutting saw machine. When cutting the aluminum alloy profile of the broken bridge, the profile can be placed smoothly on the working table of the sawing machine, the interception length and view point are more accurate, the saw edge is regular, and the cutting speed is fast. The cutting machine used in the processing point of small broken bridge aluminum alloy doors and Windows is a small toothless saw, and the cutting accuracy and power are far less than the large sawing machine.
2, hydraulic Angle machine.
Assembling Angle machine is mainly used to break the bridge aluminum alloy door and window profile Angle. The door and window equipment processing precision is high, the splicing Angle is very beautiful, there is no gap. It is generally used by large broken bridge aluminum alloy doors and Windows, and small processing points are generally used as craft group angles.
3, copy milling machine.
It is mainly used to mill the sink and keyhole of aluminum alloy doors and Windows of the bridge. Parallel milling machine can be milling holes according to the shape of the template, the shape of the template can be square, round, oval, figure-eight and so on. Intelligent hole milling features high precision and fast speed. The equipment cost of the milling machine is relatively high, and the small processing point is generally not available, and the hand opener is generally used to replace it.
4, new automatic corner saw.
It is mainly used to cut the aluminum alloy corner code profile of the broken bridge, with high cutting precision and high power. You only need to put the corner code profile on the work surface, press the start button, and the equipment will cut the whole profile. Small door and window processing shops generally use a single-head saw, a corner code a corner code cutting, low power, and not high quality.
5, new large face milling machine.
It is mainly used to mill the profiles in the aluminum alloy doors and Windows of the bridge, and 5-6 profiles can be milling together each time, and the working power is extremely high. When we replace the profile, we only need to adjust the milling cutter briefly. Small doors and Windows processing point is a small end milling, each time can only be milling a profile, if the profile has changed, the need to customize a set of tools from scratch, time-consuming work.
6. Punching machine.
Used for punching holes on profiles, square, rectangular and round holes can be punched. The punching machine is the equipment used by the large aluminum alloy doors and Windows production plant, and the small processing point is replaced by other equipment, and its accuracy and power are far less than the punching machine.
The above six kinds of doors and Windows equipment are the equipment used when we are building the broken bridge aluminum alloy doors and Windows production line, and the division of labor between each equipment is clear and the processing power is high. Different customers can choose the machine precisely after their actual situation.